softpedia copypast

Dnp ds 40 printer.DNP DS40 Dye Sub Printer (DS40)

By admin on July 15, 2021 0 Comments

 

Dnp ds 40 printer.About this item

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Shop by category.Photo Printer Parts from Imaging Spectrum – Imaging Spectrum

 

The DS40 is compatible with both Mac and Windows operating systems. Key Features: Digital Prints on Demand: Print speeds are as fast as seconds per 4″ x 6″ print; Printers have a space saving design – only inches wide by 14 inches deep by inches high; A powerful printer control engine designed to maximize image quality. DNP DS40 4×6″ Print Pack for use with DNP DS40 Photo Printer. Paper and ribbon media kit. Total of prints size 4×6″ per box. We will include several FREE /5(46). DNP Photo Imaging America Corp. 1 2 INSTALLING MEDIA DS AND DS PRINTERS Use the following procedures with your DS40 and DS Installing the Paper Roll Note Its is a good idea to check that there is enough paper in the printer to meet anticipated demand.

 

Dnp ds 40 printer.DNP DS40 Dye Sub Photo Printer – FotoClub Inc

Apr 03,  · Published on 03 April Modified on 19 December downloads. Download. DS40 Printer driver V for Windows zip. Home. Downloads. Drivers & Tools. Drivers. DS DNP Photo Imaging America Corp. 1 2 INSTALLING MEDIA DS AND DS PRINTERS Use the following procedures with your DS40 and DS Installing the Paper Roll Note Its is a good idea to check that there is enough paper in the printer to meet anticipated demand. View and Download DNP DS40 user manual online. Digital Photo Printer. DS40 printer pdf manual download. Also for: Ds
 
 
related:
DNP DS40 Refurbished Printer (DS40-B)
Printing with the DNP DS40
dnp ds40 products for sale | eBay
DNP DS40 User Manual
Frequently bought together
Refurbished DNP DS40 Dye Sub Printer – Imaging Spectrum

Table Of Contents. Table of Contents. Previous Page. Next Page. This document explains the handling and operation required to use this printer. Please read this document well before use. Improper connection could cause electric shock or fire. The outlet could overheat and cause a fire. Also, placing heavy objects on, pulling on, or bending the cord excessively can damage it, and could cause a fire.

This could cause fire or electric shock, or damage the printer. It could fall and cause injury to the user or others. Never try carrying the printer alone. Dropping it could cause injury or damage to other property. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Finnish Dai Nippon Printing Co. The scrap box, paper holder, paper cassette, and the ribbon cassette are all specific to the respective DS40 and DS Please do not switch them for use in the opposite printers.

Page Connecting The Power Cord 1. Plug the cord connector end into the printer Power Plug Socket. Plug the cord into the wall outlet.

Make sure that both the printer and computer power switches are set to the OFF position. Page 19 1. Release the Open Lever, and pull out the mechanism unit. Open Lever 2. Open the Paper Release lever. Paper Release Lever 3. Remove the scrap box. Hold the center and lift it up straight.

Caution Never remove the dust box diagonally. The dust box may be damaged and the printer may not operate normally. Page 20 5. Install the new roll of paper on the paper holder. When installing it, make sure there are no gaps between the paper and the holder. Make sure the paper is not sticking out. If the end of the roll is uneven with paper sticking out , remove it from the holder, and flatten it.

Page 21 7. Remove the tape, and advance the roll as indicated by the arrow. Set the end of the paper about 5mm beyond the roller. When doing this, insert the paper straight along the seal. Page 22 9. Turn the paper in the direction of the arrow. When it is advanced enough, the buzzer will beep, and the flashing LED orange will go out. It is easier to set if the paper is turned while securing the holder with one hand. Page 23 Set the new ribbon into the ribbon cassette.

Advance the ribbon in the direction of the arrow, and take up any slack. Take Up Supply Set it with the supply side in front. Set here Supply side Close the mechanism unit. Page 24 Attach the Paper Tray to the Scrap Box. Page Solving Media Errors 1.

Pull out the mechanism unit. Remove the ribbon cassette. If the paper is jammed: 1. Pull any paper remaining in the printer in the direction shown, and cut off any wrinkled or partially printed areas evenly with scissors. Printing over an already printed area will cause the ribbon to stick, and the paper will jam again. Page 27 2. Remove the scrap box, and rewind the paper. Cut off any partially printed, wrinkled, or otherwise inferior paper evenly with a pair of scissors, and reset the paper.

If wrinkles or partially printed areas are left, it could cause the paper to jam again. Page 28 b. If the ribbon is pulled into the mechanism: 1. Cut the ribbon. Carefully remove any ribbon remaining in the mechanism. Any pieces of ribbon left inside the mechanism could affect print quality. In this case, clean the platen roller see P. Page 29 c. If the printer is stopped in the middle of cutting: 1. Turn the power back ON. Free the jammed paper, and return the cutter blade to its ready position.

If the jammed paper cannot be freed, please contact a service representative. There may be dust, grime, adhesives, etc. Page 32 Information on servicing the printer For information on use and repair service of the units, please contact your sales agent. This manual is also suitable for: Ds Print page 1 Print document 33 pages. Cancel Delete. Sign In OR. Don’t have an account? Sign up! Restore password. Upload from disk. Upload from URL.

Comments are closed.